LED-Lampe, G4, rund, 250lm ersetzt 25W, Stiftsockellampe, Warmweiß

F Item Type : Leuchtmittel
4,49 EUR SRP
VAT included

More product information

  • Particularly energy-efficient light bulb, uses only 2.5 Watts of electricity
  • For all lights with standard G4 fittings
  • Less power and heat generation than conventional halogen bayonet base bulbs
  • Very low energy consumption, ideal for permanent lighting, e.g. as a night light in bedrooms or in corridors
  • Also suitable for table or work lighting if several LED lamps are used
Quality based on German standards

Quality based on German standards

From the initial sample to series maturity: our products undergo strict and comprehensive quality controls, managed and carried out in Germany. This enables us to guarantee compliance with all specifications, guidelines and standards – and satisfy the strictest demands.

What's in the Box

- 1 LED bulb

Technical Specs

Colour Reproduction Index RA (min.) 80
Light Colour Warm White
Beam angle 360 °
Colour Consistency 6 ≤
EAR Reg.No. DE 38720470
Energy consumption in on-mode 3 kWh/1000h
Energy Efficiency Class A to G F
Flicker for LED and OLED MLS 1 ≤
Input Voltage 12 V
Lighting technology used LED Lamp
Light source Non-directiona
Lumen maintenance factor (LED/OLED) 0.93 %
On-mode power (Pon): 2.5 W
R9 colour rendering index value 5
Shift factor for Pon (min.) 0.5
Survival factor (for LED and OLED) 1
Useful luminous flux (Φ360) 250 lm
Can be Dimmed No
Colour Temperature 2700 K
Lamp socket G 4
Optimal Ambient Temperature 25 °C
Power Consumption of an Equivalent Incandescent Lamp 25 W
Width x Depth 28 x 9 mm
Height 40 mm

Note for Consumers

The LED light is designed for operation in open luminaires. The heat generated by the light during operation may be emitted into the surrounding area.
The predicted service life is based on this mode of operation. LED lights can, of course, also be used in enclosed luminaires, however their service life will be reduced by insufficient cooling. Non-dimmable!
The LED bulb should only be used in lights intended for its use. Before changing the light, allow it to cool down completely and switch off the power supply voltage.
Damaged lights should be replaced immediately. No liability shall be assumed for damage caused by incorrect use.

Downloads

Product Data Sheet

Download